Click to load category list
JAM Systems MT2214 Speaker Cabinet Flatpack Kit
This is a complete flatpack kit to build the cabinet for the JAM Systems MT2241 speaker, designed to accommodate a pair of 12" LF drivers and a Faital Pro LTH142 1.4" throat horn flare.
Pack includes: 2 x side panels, with mitred angles. Also features CNC cutouts and recesses for 3402 handles.
1 x Rear panel with mitred angled edges. Pre-cut with recess for 87160 angled connector dish.
1 x Top Panel with curved front edge for continuous curve when stacking multiple panels
1 x Bottom Panel with curved front edge.
1 x Divider (optional) divided reduces volume to around 63 litres and shifts cabinet tuning up to about 52 Hz for a tighter punchier bass. Without the divider, volume is around 85 litres and tuning is around 40 Hz which makes the cabinet a little more general purpose.
1 x Middle brace
1 x Angled Reflex Port
3 x curved grill supports. 1 has no cutouts, this fits the top of the speaker, the second has a recess underneath for fitting between the two 12" speakers, and the last one has two recesses on the front, and acts as an extension to the reflex port with the recesses reducing the port extension.
The front panel is cut from high quality 18mm birch ply, and the other panels are 15mm high quality birch ply.
Width: 440mm (at widest point along front)
Depth 400m (from front of curve)
Detailed specifications unavailable, please EMAIL the sales office for additional information.