COOKIES: Our website uses cookies in order to provide a better online experience, this is essential for use of the shopping basket. We require
your consent to use cookies in order to meet EU regulations. Please CLICK HERE to indicate your consent and continue using our website.

ba_logo
SHOP HIRE MY ACCOUNT HELP ABOUT US CONTACT US
You are not logged in
Brand


Category
JAM Systems
JAM Systems Q10 :: 4 x 2500W amplifier
Class D Power Amplifiers : Max Power: 4 x 1100W into 8 ohm, 4 x 2200W into 4 ohm, 4 x 2600W into 2 ohms
 
Product Code: JMSQ10 | Brand: JAM Systems | Model: Q10
£799.00
£665.83 ex VAT
10% Deposit: £79.90
12 payments: £59.93
Click for details
 
Mainland UK DELIVERY:
FREE
European Delivery Prices

Qty:
JAM Systems Q10 :: 4 x 2500W amplifier

A high-performance range of professional use switch-mode power amplifiers, delivering outstanding premium power from a compact package. Its elegant 1U-footprint reduces rack space and cost, and weighing in at a shade over 10kg, set-up and breakdown of your stage is quicker and easier. Thoughtfully-designed recessed stepped attenuators make for easy and precise matching of gain structures, and a completely modular channel architecture means that each of the four channels has its own dedicated power supply for ultimate stability, with zero crosstalk or interference between channels. Employing a classic pulse-width modulation design, high switch-mode frequency and precise controlling of deadtime makes for exceptionally low distortion, surpassing the quality of traditional transformer-based amplifier designs. The high efficiency power supply is kind to the environment and ensures weight is kept to a minimum, with a circuit tailored for reliability that helps make sure your amplifier will continue to provide you with driving power time after time.

All 4 channels are identical, and each channel has a separate switched mode PSU, the power output per channel is the same regardless of whether one channel is driven or all 4 channels are driven:

2500W into 2 ohms - * EIAJ burst | 1300W into 2 ohms - ** 100Hz continuous
2350W into 4 ohms - *** 1kHz continuous | 2200W into 4 ohms @ 100Hz
1250W into 8 ohms - *** 1kHz continuous

* EIAJ 8:32 burst power measured at 1khz, 1% THD. This represents the maximum power available for signals with a high crest factor, and is approximately equivalent to speaker's published program power. ** 2 ohm power measured with 100Hz sine wave for a 10 second burst. Current limiting reduces the continuous output at 2 ohms to approximately 1300W. This is an indicator of maximum continuous power in bass applications *** 1kHz sine wave tested for 10 second burst with 1% THD

EIAJ ratings are short term burst ratings, but are representative of mid/high signals with a typical crest factor for common music. We have tested these amplifiers at 100Hz into 2 ohms and 4 ohms for purposes of assessing bass response. Continuous signals into low impedances trigger current limiting in the amplifier (self protection) which reduces the usable output power. Exceeding clip for over 2 seconds causes the amp to automate to self-protect. Higher crest factor signals are usually limited more by voltage rather than current, which allows significantly higher burst powers into 2 ohms compared with the continuous 100Hz rating.

Specifications:

  • Number of channels: 4
  • Frequency response (@8 ohms): 20Hz - 20kHz, +/-0.3dB
  • Slew rate: 50V/us
  • THD+N: <0.3%
  • IMD-SMPTE: <0.3%
  • SNR: >105dB
  • Crosstalk: >75dB
  • Damping Factor: >800 (8 ohms, 20Hz-200Hz)
  • Sensitivity: 1V
  • Input Impedance: 20k ohms (Balanced), 10k ohms (unbalanced)
  • Voltage Gain: 40dB
  • Protection: Auto mute for 2 seconds if clip level exceeded.
  • Efficiency: >85%
  • Cooling: Forced air flow from front to rear
  • Height: 1U
  • Product Dimensions: 483 x 375 x 44 (WxHxD)
  • Packaged Dimensions: 530 x 530 x 90 (WxHxD)
  • Net Weight: 10.5kg
  • Gross Weight: 12.2kg

Delivery Price Match
UK & EIRE
Delivery Info for JAM Systems Q10 :: 4 x  2500W amplifier  to locations within the United Kingdom and Ireland
EUROPE
Delivery Info for JAM Systems Q10 :: 4 x  2500W amplifier  to locations in Europe
We will match any genuine price for JAM Systems Q10 :: 4 x  2500W amplifier
If you find 'JAM Systems Q10 :: 4 x 2500W amplifier' cheaper elsewhere, let us know and we'll try to match or beat the price! click for Price Match info for JAM Systems Q10 :: 4 x 2500W amplifier Price Match Terms and Conditions
Related Products
Other JAM Systems products similar to JAM Systems Q10 :: 4 x 2500W amplifier:

JAM Systems Q7 :: 4 x 1600W amplifier

Price: £699.00 inc VAT (£582.50 ex VAT)

JAM Systems B8 :: 2 x 2500W - 2 x 1600W amplifier

Price: £739.00 inc VAT (£615.83 ex VAT)

Other products you may be interested in:

dB-Mark DP28 2-in 8-out Digital Active Crossover

Price: £350.00 inc VAT (£291.67 ex VAT)