 |
| |||||
| ||||||||||||||
- 2400 W continuous program power capacity
- 100 mm (4 in) copper voice coil
- 35 - 1000 Hz response
- 97 dB sensitivity
- Aluminium demodulating ring allows a very low distortion figure
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
This model has Spade Terminals. For push-fit see the BAC18TBX1008M
Specifications
- Nominal diameter 460 mm (18.0 in)
- Nominal impedance 8 ohms
- Minimum impedance 6.2 ohms
- Nominal power handling * 1200 W
- Continuous power handling * 2400 W
- Sensitivity (1W/1m) * 97.0 dB
- Frequency range 35 - 1000 Hz
- Voice coil diameter 100 mm (4.0 in)
- Winding material Copper
- Former material Glass Fibre
- Winding depth 25 mm (1.0 in)
- Magnetic gap depth 12 mm (0.5 in)
- Flux density 1.1 T
Design
- Surround shape Triple Roll
- Cone shape Radial
- Magnet material Ferrite
- Spider Double Silicone
- Pole design T-Pole
- Woofer cone treatment TWP Waterproof Both Sides
- Recommended enclosure 200.0 dm3 (7.06 ft3)
- Recommended tuning 34 Hz
Thiele and Small parameters: Need some help? Read our quick guide to TS Params.
- Fs 34 Hz
- Re 5.1 ohms
- Qes 0.37
- Qms 7.2
- Qts 0.35
- Vas 212.0 dm3 (7.5 ft3)
- Sd 1210.0 cm2 (187.6 in2)
- Reference Efficiency. 2.2 %
- Xmax 9.0 mm
- Xvar 11.0 mm
- Mms 209 g
- Bl 25.5 Tm
- Le 1.6 mH
- EBP 91 Hz
Mounting and Shipping Info
- Overall diameter 460 mm (18.0 in)
- Bolt circle diameter 440 mm (17.3 in)
- Baffle cutout diameter 422.0 mm (16.6 in)
- Depth 209 mm (8.2 in)
- Flange and gasket thickness 16 mm (0.62 in)
- Air volume occupied by driver 10.5 dm3 (0.37 ft3)
- Net weight 13.0 kg (28.6 lb)
- Shipping units 1
- Shipping weight 14.4 kg (31.7 lb)
- Shipping box 500x500x250 mm (19.7x19.7x9.8 in)
| Other B & C products similar to B&C 18TBX100 - 18" 1200W 8 Ohm Loudspeaker: |
|
If you find 'B&C 18TBX100 - 18 inch 1200W 8 Ohm Loudspeaker' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.
View B & C website for more information for B & C 18TBX100What do these labels mean?
- Original
- We believe this is an exact match for the original part, although we can't always verify the factory specification.
- Aftermarket
- A lower-cost replacement made to match the original part's size, shape and fit. Sound and performance may differ.
- Equivalent
- A very close match. The original may have been a slightly different factory version.
- Alternative
- A different part we recommend for this model when the usual replacement is unavailable. Check any fit or installation notes before ordering.
| Equipment | Original part | Match type |
|---|---|---|
| Martin Audio W8LS | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio WLX | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio WLXGS | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio AS118 | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio AS118WR | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio WS218X | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio WS118X | DLS1847 | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| Martin Audio Blackline S218+ | DLS18001 | A very close match in fit and performance. The original may have been a slightly different version of this part. |
| D&B Q-SUB | QSUB | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| D&B Ci-SUB | — | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| D&B B2-SUB | — | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| D&B C4-SUB | — | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |
| D&B Q-SUB | — | We believe this is the same part fitted originally. Manufacturers sometimes use a slightly different factory version, so we can't always verify an exact match. |