JAM Systems :: JAM Systems Amplifiers :: JAM Systems Stereo Power Amps :: JAM Systems X16
JAM Systems

JAM Systems X16 2-Channel Power Amp [ 2 x 800W]

2 x 350W @ 8 ohms, 2 x 580W @ 4 ohms, 2 x 800W @ 2 ohms
Product Code: JMSX16 Brand: JAM Systems
JAM Systems X16 2-Channel Power Amp [ 2 x 800W]
£157.50
£157.50 ex VAT
Decrease Increase
2
IN STOCK
Sorry we dont have a delivery price for Country
Export prices without Sales Tax or VAT - additional customs fees may apply in your country
JAM Systems X16 2-Channel Power Amp [ 2 x 800W]

The X-Series is a compact 1U range of professional power amplifiers designed for high efficiency, reliability, and clean audio reproduction. Each model uses a Class-D output stage and an LLC resonant SMPS with active PFC, ensuring stable performance across global mains voltages.

Key Features:
  • Compact 1U chassis, lightweight and portable
  • High-efficiency Class-D amplifier module with fixed switching frequency
  • Soft-start LLC resonant power supply
  • Active Power Factor Correction (PFC) for worldwide 90–264V AC operation
  • High damping factor for precise speaker control
  • Peak limiter for output protection
  • Output LC filtering for reduced switching noise
  • Temperature-controlled variable-speed fan with front-to-rear airflow
  • Selectable operating modes: Stereo, Parallel, Bridge
  • Input sensitivity options: 0.775V, 1V, or 32dB
  • Comprehensive protection suite including soft-start, DC and subsonic protection, VHF protection, thermal and short-circuit protection, overload protection, and clip/distortion limiting

Warranty

The amplifier is covered by a 1-year limited warranty against defects in materials and workmanship. Warranty excludes misuse, operating beyond stated specifications, or unauthorised repairs.

Power
8Ω (stereo)2 × 350W
4Ω (stereo)2 × 580W
2Ω (stereo)2 × 800W*
8Ω (bridge)1 × 1160W
*2Ω operation is supported for high crest-factor programme material only.

Technical Specifications
Frequency Response: 20Hz – 20kHz (+/-0.5dB)
THD+N: ≤ 0.05%
Signal-to-Noise Ratio: >104dB (A-weighted)
Damping Factor: ≥ 600
Slew Rate: >20 V/μs
Input Sensitivity: 0.775V / 1V / 32dB
Input Impedance: >20kΩ (balanced)

Load Impedance and Operating Notes
4Ω per channel is stable for all normal applications and is the recommended minimum load for long-term operation and maximum thermal reliability.
2Ω per channel operation is supported for high crest-factor programme material such as live music or speech. Sustained high output levels or continuous low-frequency content at 2Ω may result in increased thermal stress and possible overheating. Adequate ventilation must be ensured when operating at low impedances.

General
Dimensions (W × D × H): 482 × 251 × 44 mm
Net Weight: 5 kg
Audio Input Connections: 3-pin XLR
Amplifier Outputs: Industry-standard 4-pole locking loudspeaker connectors
Mains Connection: IEC inlet (power cable included)
Operating Modes: Stereo, Parallel Mono, Bridge
In Parallel Mono mode, Channel 1 gain control is used for both output channels.
Cooling: Front-to-rear forced-air cooling – rear ventilation must be kept unobstructed
Price match on JAM Systems X16 2-Channel Power Amp [ 2 x 800W]
Seen this cheaper?
If you find 'JAM Systems X16 2-Channel Power Amp [ 2 x 800W]' at a lower price from an authorised UK dealer, tell us and we'll aim to match it. Request a price match. Terms & Conditions.

Product reviews

Write a review

Write a review

✓
✓Warranty support available
✓
✓